Manufacturer Direct Pricing In Store - Black Diamond Coatings

Find the right product

We are committed to your success! This short quiz will help you find the right product to fit your project’s needs.

Where can our products help you?

Use our innovative indoor and outdoor home products for people like you, who expect more.

What is your surface?

  • Tiles

    Including both floor and wall tiles intended for use throughout the house, especially kitchen and bath areas. The most common tile material is ceramic, but porcelain, glass, marble, and granite have also become popular indoors.

    Close
  • Grout

    Most traditional grout is a mixture of water, cement, sand, and optional coloring. These grouts based on natural materials are porous, making them susceptible to stains and damage caused by water, liquids, dirt, mold, and bacteria. There are some grouts that are Epoxy-Based though; they are non-porous, easily cleaned and stain-resistant, so they do not need to be sealed.

    Close
  • Stainless Steel

    Stainless steel is an alloy steel that is resistant to rust, corrosion, and heat, making it a popular material in kitchen appliances and backsplashes. There are a number of different types of stainless steel that differ based on the included metals and amounts.

    Close
  • Carpet

    A floor covering made of woven material. Carpet can be made from all-natural fibers like Wool, but they are most commonly made from modern, synthetic blends of Nylon, Polyester or Olefin.

    Close
  • I'm not sure

    Although our DOMINATOR line of sealers work on bare concrete, the surface does not have much color to enhance, thus more often than not the most desirable finish is the natural look of the AQUA X-11.

    Close

Grout

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent cursus mauris quis urna euismod feugiat. Quisque non odio est. Quisque pharetra dignissim magna, sed sagittis eros egestas a. Praesent vulputate eget mauris vel tempus. Nunc quis tellus diam. Nullam eu urna pellentesque quam tincidunt efficitur. Donec consequat sagittis tellus id dapibus. In placerat ultrices ex, vitae pretium ante pretium in. Maecenas pellentesque ex vitae magna fringilla pellentesque. Pellentesque quis eros a lorem lacinia elementum non in dolor. Etiam eu commodo tellus.

Close

What would you liking to do with your --selected-value--?

Are the --selected-value-- polished or glazed?

  • If your --selected-value-- is polished, we do not recommend sealing your surface…

Would you like to enhance the color of your tiles?

  • If your is polished, we do not recommend sealing your surface…

  • If your is polished, we do not recommend sealing your surface…

  • If your is polished, we do not recommend sealing your surface…

Do you want to add shine or a matte finish?

What is your surface?

Scroll through the thumbnails for each surface listed and click on the (i) icon for more information to help decide what type of surface you have. Please don’t hesitate to call and chat if you are unsure.

  • Concrete Pavers

    Decorative pavers cast from cement come in a wide variety of looks and sizes that can sometimes mimic natural stone or brick. They can be porous or dense, depending on the manufacturing methods and aggregate used. Check with us if you’re uncertain about your surface.

    Close
  • Decorative Concrete

    Also referred to as Stamped or Stained, Decorative Concrete is either poured like a traditional slab and then treated with additional decorative touches before the concrete dries – adding texture, dimension and color; or, it can be created as an overlay on an existing concrete surface. Porosity can vary, depending on post-installation treatment.

    Close
  • Bare Concrete

    This is the standard concrete of your Driveway, Sidewalk, or plain patio slab. Broomed finishes can be porous or dense (e.g., higher strength mixes are denser); smooth troweled finishes typically make the surface denser; and a polished concrete surface can be very dense and should be treated like Natural Stone.

    Close
  • Natural Stone

    The most popular Natural Stone surfaces include Flagstone, Fieldstone, and Bluestone. Natural stone can vary in hardness and density, so be sure to check with us if you’re using something less common.

    Close
  • Travertine

    A type of Natural Stone, Travertine comes a in a wide variety of soft, natural colors; this stone is very dense.

    Close
  • Aggregate

    Aggregate (or Exposed Aggregate) surfaces can include a variety of additional materials pressed into cement-based pavers – pebbles, glass, shells, and more; or traditional exposed aggregate concrete exposes the aggregate mixture through a chemical process.

    Close
  • Clay Pavers/Fired Bricks

    This includes clay-based bricks, Chicago brick pavers (also called Burnt Clay) and Saultilo Tiles, which are unglazed clay tiles. If your “bricks” are primarily sand lime or cement instead of clay, please give us a call for specific advice.

    Close
  • Faux Stone

    Also known as Synthetic, Manufactured or Veneer, Faux Stone is typically used as stacked stone to mimic popular natural stone colors, textures, and patterns, but they are instead made from molded concrete. Polypropylene (plastic) faux stone tiles do not need to be sealed.

    Close
  • Mulch

    Mulch is used to conserve soil moisture, inhibit weeds, and increase the visual appeal of landscaped area. The most common types are Pine Bark, Pine Straw, Cypress Bark and Rubber Mulch.

    Close
  • I’m not sure

    Although our DOMINATOR line of sealers work on bare concrete, the surface does not have much color to enhance, thus more often than not the most desirable finish is the natural look of the AQUA X-11.

    Close

Grout

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent cursus mauris quis urna euismod feugiat. Quisque non odio est. Quisque pharetra dignissim magna, sed sagittis eros egestas a. Praesent vulputate eget mauris vel tempus. Nunc quis tellus diam. Nullam eu urna pellentesque quam tincidunt efficitur. Donec consequat sagittis tellus id dapibus. In placerat ultrices ex, vitae pretium ante pretium in. Maecenas pellentesque ex vitae magna fringilla pellentesque. Pellentesque quis eros a lorem lacinia elementum non in dolor. Etiam eu commodo tellus.

Close

What would you like to do with your --selected-value-- surface

  • If your outdoor surface is --selected-value--, we do not recommend sealing your surface…

What type of finish would you like on your surface?

Please note that different surfaces will naturally produce different amounts of gloss. Darker and smoother surfaces will produce a much higher gloss than lighter, more porous surfaces.

  • High Gloss/Wet look

    This finish will add a high sheen and will provide your surface with a color-enhancing wet look (as if you sprayed your pavers, concrete, or stone with water).

    Close
  • Low Gloss/Satin Look

    This finish will add a low sheen and will provide your surface with a color-enhancing wet look (as if you sprayed your pavers, concrete, or stone with water).

    Close
  • No Gloss/Wet Look

    This finish will not add shine, instead it will provide your surface with a color-enhancing wet look (as if you sprayed your pavers, concrete, or stone with water).

    Close
  • Natural Finish

    Although our DOMINATOR line of sealers work on bare concrete, the surface does not have much color to enhance, thus more often than not the most desirable finish is the natural look of the AQUA X-11.

    Close
  • I'm not sure

    Although our DOMINATOR line of sealers work on bare concrete, the surface does not have much color to enhance, thus more often than not the most desirable finish is the natural look of the AQUA X-11.

    Close

Grout

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Praesent cursus mauris quis urna euismod feugiat. Quisque non odio est. Quisque pharetra dignissim magna, sed sagittis eros egestas a. Praesent vulputate eget mauris vel tempus. Nunc quis tellus diam. Nullam eu urna pellentesque quam tincidunt efficitur. Donec consequat sagittis tellus id dapibus. In placerat ultrices ex, vitae pretium ante pretium in. Maecenas pellentesque ex vitae magna fringilla pellentesque. Pellentesque quis eros a lorem lacinia elementum non in dolor. Etiam eu commodo tellus.

Close

Are your joints between 1/8 of an inch and 4 inches in width?

Please note: In joints narrower than 1/8 of an inch, the sand does not have enough room in the joint to create a strong bond. In joints wider than 4 inches, there is too much surface area

Do you have at least one inch of depth in the joints?

Please note: When there is not at least one inch of depth in the joint, there will not be enough sand present in the joint to create a strong lasting bond.

  • If your is polished, we do not recommend sealing your surface…

Do you have a base underneath the pavers that allows for good drainage?

Proper sloping and drainage should be used as necessary. Polymeric sand is not for use on constantly wet or submerged surfaces. Click here for more info.

  • If your is polished, we do not recommend sealing your surface…

Do you have any areas where water runoff is present?

A large amount of water in one concentrated area from water runoff has the ability to wear down the sand over time and can even cause wash-out.

Not sure?

Get in touch with one of our product experts who will be able to help you find the right product.

USA Flag Icon
Photograph Icon

We're here to help...

Get in touch with one of our product experts who will be able to help you find the right product.

USA Flag Icon
Photograph Icon

Coming Soon!

The OBSESS brand of cleaners. For advance access and special promotional pricing at launch, please enter your email address.

Shop All

Receive your recommendations

Get your print-ready recommendations delivered to your inbox and stay up-to-date with our latest releases, how-tos, and secret sales.

USA Flag Icon

Your Result

Your Results

Result Product Image Result Product Image Result Product Image

Low Gloss Sealer

Wet Look, Low Gloss Paver Sealer

  • Fast drying
  • Professional Grade
  • Screatch & Stain resistant
  • Color enchancing
Result Product Image Result Product Image Result Product Image

Low Gloss Sealer

Wet Look, Low Gloss Paver Sealer

  • Fast drying
  • Professional Grade
  • Screatch & Stain resistant
  • Color enchancing
Result Product Image Result Product Image Result Product Image

Low Gloss Sealer

Wet Look, Low Gloss Paver Sealer

  • Fast drying
  • Professional Grade
  • Screatch & Stain resistant
  • Color enchancing

Don’t forget to check out the Coverage Calculators available on the individual product pages, to find out how much to order.

Search Results

Products

0 results View all

Category

Pages

FREE Shipping over $35USD within the contiguous United States! Orders by 1 PM ship SAME DAY from Florida!

0

Your Cart is Empty

Hometown Discount

Your Savings

If you live near Brooksville, Florida, by direct and save!  We offer competitive retail pricing in store when you pick up our products in our facility.  Contact us to find out how much you can save by buying in person.  When we save on the shipping, you save on the product!

Place your order over the phone, and we'll have it ready for you when you arrive.  Or, we can take your in person.  We're here to help!

Please make sure to tell us you ask for your HOMETOWN DISCOUNT!

To the public business hours:

Monday to Friday: 8 am - 3 pm (excluding holidays)

Our address:

6036 Nature Coast Blvd.
Brooksville, Florida 34602

Phone: 800-270-4050

Directions:

Black Diamond Coatings is conveniently located off of I-75 North in Brooksville, Florida, just north of Tampa. Take I-75 exit 301 for FL-50 W/US-98 toward Brooksville. Turn south on Nature Coast Blvd. Please come to the front entrance to place or pay for orders. Pre-paid pick ups can be made at the Shipping and Receiving Loading Dock.