DOMINATOR STONE+ GLOSS - Satin Finish Clay Brick and Stone Sealer - Black Diamond Coatings

Search Results


0 results View all



Order by 1 pm ET for SAME DAY SHIPPING!: Click Here for Details


Your Cart is Empty

DOMINATOR STONE+ GLOSS - Wet Look Satin Finish Stone Sealer and Clay Brick Sealer

"Our brick patio now looks new again with a subtle wet look finish."

76 reviews

You're $50.00 away from free shipping.

Customer Reviews

Based on 1 review Write a review

HOW TO & VIDEOS Order a Sample Size


COLD WEATHER WARNING: Do not apply if surface temperature is expected to be below 50° for 48 hours before & after application.

Give yourself the gift of outstanding curb appeal with DOMINATOR Sealers for stone and clay brick pavers. They enhance the life and beauty of your pavers or decorative concrete. There are 2 gloss levels to choose from: GLOSS for a semi-gloss/low gloss wet-look sheen, or MATTE for a color-enhanced wet look with no gloss. Gloss level will depend on the porosity and texture of your surface.

Protect your surface with the breathable, film forming sealer that protects from oil stains and other spills while providing incredible UV protection.

Our professional grade water-based formula provides subtle color enhancement (wet look) while also being low VOC. Breathe easy while applying DOMINATOR sealers since there are no harsh odors. This makes for a seamless cleanup and application process.

Your money goes farther with this product with our amazing coverage rates and 2-4 years before resealing. You will save money and time by reducing maintenance when you seal with DOMINATOR Sealers. Dense stones like travertine should yield a coverage rate of 600-800 square feet per gallon. Bluestone, Flagstone, and Mexican tile and clay pavers are more porous, so a typical coverage rate should be about 400 square feet per gallon. (Be sure to perform a porosity test.)

If you have concrete pavers or decorative concrete, check out DOMINATOR SG+, LG+ and NG+ for the same superior performance, but specifically formulated for your surface.


  • Keep a clean, WET LOOK, SATIN to GLOSS FINISH and improve the LONGEVITY of your outdoor stone, clay pavers, faux stone and travertine
  • EASILY MAINTAIN your exterior surface with our incredible UV PROTECTION. The film forming sealer guards against spills, moisture and other stains.
  • BREATHE EASY when applying this sealer due to NO FOUL ODOR and LOW VOCs as so many reviews have noted.
  • Your money goes farther with this product – AMAZING COVERAGE RATE 400 to 800 square feet per gallon, (typically one coat), and long lasting protection.
  • EASY SPRAY ON APPLICATION using our included QUICK START Guide and available HOW TO Videos.
  • Please follow the hardscape manufacturer's recommendation regarding sealing.
Get the Right Coverage

One common question that both DIYer's and contractors alike ask is: "How much sealer should I apply?"

The porosity of your pavers is critical to the answer. Think of this as the "sponge factor." The more porous the paver, the more liquid or sealer it will absorb. The first step in figuring out how much sealer you need is determining the porosity of the paver from the start of your project.

Generally, the densest surfaces don't accept much liquid. On the other hand, very porous surfaces will quickly soak up water. Is the surface you want to seal DENSE or POROUS?

Easy Porosity Test

1. Make sure your pavers are clean and dry.

2.Drip a small amount of water onto your paver or surface. (A teaspoon, water dropper, or a steady hand with a water bottle will do the trick!)

3. Count how long it takes for the drop of water to be absorbed by the paver.

Absorbed in 0-3 seconds = EXTREMELY POROUS
Absorbed in more than 8 seconds = EXTREMELY DENSE

Generally, apply 1 coat of sealer to DENSE natural stone and clay surfaces. You may need to apply a second coat to more POROUS stone surfaces.

DO NOT OVER APPLY. Additionally, we recommend applying a texture additive such as Diamond Grit in the final coat to increase traction on particularly smooth surfaces or areas prone to slipping, like pool decks, sloped areas or stairs.

This product will cover 800 square feet per gallon on very DENSE surfaces. You’ll need more product for more POROUS surfaces.

Dominate Your Pavers

This is an approximation of how much sealer you will need for your project. Depending on the surface porosity, application method, and previous treatments, coverage rates may vary.

Dense Stone Calculator

Gallons for SQ. FT.

Porous Stone Calculator

Gallons for SQ. FT.
Customer Reviews
4.9 Based on 76 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
  • color
  • application
  • sealer
  • stone
  • results
  • customer service
  • look
  • sheen
  • patio
  • coat
Ken E.
United States United States
I recommend this product

Winter Room

We searched online and found this product - my wife and I put this on our flagstone in a covered 475 sf area. It came out great. And we really like it. It did take 3 1/2 gallons to do it properly. But we are happy with the end end results.

Black Diamond Coatings DOMINATOR STONE+ GLOSS - Wet Look Satin Finish Stone Sealer and Clay Brick Sealer Review

Black Diamond Coatings

Hello Ken! What a beautiful turn out! Thank you so much for that wonderful feedback on the DOMINATOR STONE+ GLOSS and for sending in your photo! We love seeing results! We look forward to working with you on future projects! Thanks! -BDC Care Team

George B.
United States United States
I recommend this product

Stone+ Gloss On New Flagstone Walkway

Researched many products. Chose Stone+ Gloss for my new flagstone walkway in Texas. Such easy application. And in 105 degree weather! Just follow simple directions, one coat applied to cleaned flagstones and WOW - what a difference! Highly recommended…

Black Diamond Coatings DOMINATOR STONE+ GLOSS - Wet Look Satin Finish Stone Sealer and Clay Brick Sealer Review

Black Diamond Coatings

Hello George! WOW! What a beautiful turn out! Thank you so much for that wonderful feedback and for sending in your photos! We love seeing the before and after! We are so happy that your project turned out nicely and with ease! We look forward to working with you on your future projects! Thanks! -BDC Care Team

A Black Diamond Coatings Customer
Terri B.
United States United States
I recommend this product

Sealer that's very easy to use

Yesterday we used a garden pump sprayer to put 2 coats of your Satin Finish Dominator Sealer on our flagstone patio. There is a light sheen on the stones. Dry time was accurate at approx. 1 hour between coats. I wasn't sure I wanted a high gloss finish on the patio, but now that the sealer is dry, I think the High gloss would've given me more of the color popping wet look I was hoping for. The next time I seal it I'll try the high gloss finish. I purchased a bottle of your Grit non-slip additive, but chose not to use it this time. We'll wait to see if it becomes necessary. The sealer was easy to use and apply and now I'll wait to see how long the sealer stands up to the weather. Thanks for making an affordable way for me to seal my own patio. The builder of the patio wanted $2,200.00 to do what I spent about $200.00 to do! The questions I had were dealt with quickly and in a friendly manner. I felt very confident doing this job myself after speaking with their agents.

Black Diamond Coatings DOMINATOR STONE+ GLOSS - Wet Look Satin Finish Stone Sealer and Clay Brick Sealer ReviewBlack Diamond Coatings DOMINATOR STONE+ GLOSS - Wet Look Satin Finish Stone Sealer and Clay Brick Sealer Review

Black Diamond Coatings

Hello Terri! Thank you for sharing your photos with us! We are so glad to see you had a smooth and confident application process! We are also pleased to hear you had a positive, educating experience with our Care Team! We always welcome questions and look forward to helping you with your future projects and endeavors! Thanks! BDC Care Team