Grout Sealer

What You Need

Spray Bottle

Link Free Cloth

Installation Instructions

Before you get started, make sure to read all of the instructions and watch the short how to video for best application practices. These application instructions apply to AQUA-X Grout Sealer; other brands may be different.
Coverage Rate

Covers up to 75 feet per 16oz bottle

Before You Start
  • Clean & rinse the surface well—don’t trap dirt or stains under the sealer. Use the Aqua X Grout and Tile Cleaner to clean before sealing.
  • Make sure the surface is completely dry before starting. Applying to a wet surface will not allow the product to penetrate correctly.
  • Protect any nearby areas you don’t want sealed.
  • Always do a small test spot first to ensure the product will work on your surface.

**Product cannot be applied to nonporous materials such as glazed tile. If the product overspray, simply wipe it off with a clean microfiber cloth to avoid a sticky residue. 

Step 1: Apply
  • Mix well before use.
  • Do not dilute the product.
  • Apply two wet-on-wet coats—avoid puddles or drips. If needed, use a clean microfiber cloth or roller to soak up excess product. 
    ** Do not flood/over-coat the surface. This will result in a sticky residue. Be sure to wipe away excess product before it dries on the surface. 
  • Let it dry for a minimum of 2 hours before use. Final cure time is 24-hours.
Step 2: CLEAN-UP/MAINTENANCE
  • Clean tools thoroughly after use to remove all sealer residue.
  • Sealer may stain clothing, but it can be washed off skin with mild soap.
  • Wipe up oil or fluids quickly from sealed surfaces using a gentle cleaner.