Keep a clean, NATURAL APPEARANCE and improve the DURABILITY of your concrete driveway, patio pavers, unglazed cement tiles, concrete block retaining wall, cast concrete or your garage floor; now, formulated to be fantastic on natural and faux stone surfaces also!
PROTECTS AGAINST mold, mildew, concrete spalling, freeze thaw, pitting, salt damage after sealing with AQUA-X 11 Concrete and Stone Sealer
BREATHE EASY when applying AQUA-X 11 due to NO FOUL ODOR and LOW VOCs as so many reviews have noted
Your money goes farther with AQUA-X 11 Concrete and Stone Sealer with TWICE THE COVERAGE RATE - up to 600 square feet per gallon on concrete surfaces, and up to 5 years before resealing; up to 1000 square feet per gallon on stone surfaces (e.g., travertine) with one coat coverage.
EASY ONE COAT SPRAY ON APPLICATION using our included Application Guide and available Application Videos
Please follow the hardscape manufacturers recommendation regarding sealing.
This is an approximation of how much sealer you will need for your project. Depending on the surface porosity, application method, and previous treatments, coverage rates may vary.
I applied Aqua X 11 to new paver deck that was installed about 6 months ago and is about 1500 sq ft with a fire pit and retaining wall. I installed it following all instructions, using a backpack sprayer and used a paint shield to help with overspray. It was very easy to apply and I used about 4 gallons for the whole deck. Considering the coverage it is very economical compared to other products and I would defiantly recommend this product. I also called them twice with questions and they were very knowledgeable and helpful! Great company and love that it is Veteran owned!
Hi Vivian.
Some surfaces are more porous than others, so that would impact the amount of product needed. We hope you love the end result though!
Thanks!
Customer Care Team - Black Diamond Coatings
TV
12/08/2020
Teron V.
United States
I recommend this product
Aqua x 11 sealer
Good! Dries out fast. Changes the look in areas where concrete has discoloration. I used this on my 6 months old concrete driveway. I have a pretty long driveway from the road so for the most part concrete did not loose it’s natural color.
Aqua-X 11 sprayed on easily with very little puddling. My slate patio looks great and rain beads up nicely. It's still too early to tell if it will last. For the money, this product covers more than other products I've tried for less money.
The sealer was easy to work with which makes the coating of the concrete go very smoothly.. We pressure washed, coated and let dry - DONE! Spilled some water on it after and dried and the beads of water were proof that it work as advertised. Great product!
Three years ago re-did my pool area with another product and it didn't last. So two years ago I used Black Diamond and it was easy to use and still looks great. I recently re-did my drive with this and it came out perfect. I would Strongly Recommend this and the joint sand.
Great experience with this product. I hand sprayed four gallons on freshly pressure washed sidewalks and driveway. Completed the spraying in about one hour. Two weeks in and loving the effectiveness of this product.
Don’t spend weekends power washing! Keep your hardscape surface clean after a thorough pressure washing by sealing it with an EASY TO APPLY and LONG LASTING, sealer. Seal your driveway, patio, tiles, retaining wall, or your garage floor with this commercial grade sealer. It protects the surface from the UV rays, mold and mildew and freeze-thaw (and de-icing) damage. AQUA-X sealers creates a moisture barrier and will allow the water to bead on the top rather than penetrating into your surface. After you seal your surface, it makes future maintenance so much easier. Using your garden hose, spend a few minutes lightly hosing off the pollen, mildew, dirt, and any other buildup from the weather. Once sealed, your surface is protected for up to 5 years before having to reseal. Now that is a lot of saved time!
We have many homeowners that call and email each day with this question, so you are not alone! Sealing your surface doesn't have to be a job you contract out. Watch our application videos and read our short homeowner guide so you feel confident in your sealing abilities. Homeowners just like you are raving about this highly effective sealer - easy application. Check out the infographic on the right to see what you will need for this project!
–The sprayer will help distribute the product more evenly on the surface. Any sprayer will work for our products, although high pressure sprayers will allow higher coverage rates.
–The roller should be used to back-roll any puddles or drips, and to smooth the sealer in textured areas. If you’ve re-sanded the paver joints, ensure that the sand is 1/8” below the top of the paver surface to avoid pulling it up on the roller.
–The extension pole will be used to attach to the roller handle and roller nap. This will allow you to roll onto the surface without bending over.
–The tape will be used to secure the protective paper or plastic on areas that you don't want the sealer to enhance, such as your doors, garage door, garden, etc.
–The protective paper (plastic or paper) will be used to block off the areas where you don't want sealer to be applied.
Generally, apply one coat of sealer to surfaces with a sprayer with the appropriate spray pattern for the project. If product puddles or drips on the surface, back-roll to smooth out excess product for even coverage. DO NOT FLOODCOAT. Prior to application, the surface should be completely dry for best results. The surface temperature should be between 30-120° F (-1-49° C), and it should be maintained for 12 hours from the start of application. Do not apply below 40°F (4°C) or above 95°F (35°C). See Technical Data Sheets, our Homeowner Guide and our application videos on our website. Always test using the product to ensure suitability, the desired results prior to full application, and for the application coverage rate. Use the same preparation, equipment and conditions expected during the entire application. Do not let the product freeze; and dispose of properly if it is allowed to freeze. Remove oil and other fluids from the sealed surface as soon as possible using a mild cleaning agent. Please visit the get educated tab for detailed application instructions, Technical and Safety Data Sheets, video demonstrations and other helpful information. Made in the USA.